Virtual I/O Server - Commands V

Network Configuration :

TCP/IP Configation:

To configure tcpip on a network interface :

# mktcpip -hostname sys01vio2 -inetaddr 9.47.90.113 -interface en2 -netmask 255.255.255.0 -gateway 9.47.90.1 -nsrvdomain yahoo.com -start

-

To display the stored tcp/ip configuration in the system :

# lstcpip –stored

To display ethernet adapters on the system :

# lstcpip –adapters

To display the system hostname :

# lstcpip –hostname

To display DNS name servers in search order and domain name :

# lstcpip –namesrv

To display the routing table :

# lstcpip –routtable

To display routing table in numeric output instead of hostname :

# lsctpip –num –routtable

To display all the open inet sockets :

# lstcpip –sockets –family inet

To display the status of all configured interfaces :

# lstcpip –state

To remove all TCP/IP configuration :

# rmtcpip –all

To unconfigure tcpip in en0:

# rmtcpip –interface en0

To cleanup static routing table :

# rmtcpip –f -routing

To remove IP information from en0 after reboot :

# rmtcpip –f –interface en0 -nextboot

To remove DNS information and clears the hosts file :

# rmcpip –namesrv

Managing IP address-to-host name Mapping Entries:

To add IP address-to-host name mapping entry :

# hostmap -addr 192.100.1.7 -host alpha

To list all IP address-to-host name mapping entries :

# hostmap –ls

To delete the IP address-to-host name mapping entry :

# hostmap-rm 192.100.1.7

Managing Network Services:

To enable all the network services :

# startnetsvc ALL

To enable the telnet daemon :

# startnetsvc telnet

To enable the ftp daemon :

# startnetsvc ftp

To enable the ssh daemon :

# startnetsvc ssh

To enable the ldap daemon :

# startnetsvc ldap

To enable the cimserver daemon :

# startnetsvc cimserver

To enable the xntpd daemon :

# startnetsvc xntpd

To send CLI tracing details to the system log :

# startnetsvc tracelog

To send system error to the system log :

# startnetsvc errorlog

To disable all the network services :

# stopnetsvc ALL

To disable the telnet daemon :

# stopnetsvc telnet

To disable the ftp daemon :

# stopnetsvc ftp

To disable the ssh daemon :

# stopnetsvc ssh

To disable the ldap daemon :

# stopnetsvc ldap

To disable the cimserver daemon :

# stopnetsvc cimserver

To disable the xntpd daemon :

stopnetsvc xntpd

To stop sending CLI tracing details to system log :

# stopnetsvc tracelog

To stop sending system error log to the system log :

# stopnetsvc errorlog -

To display the status of ftp network service :

# lsnetsvc ftp

Managing DNS, Domain and Search Order Entries:

To add a domain entry :

# cfgnamesrv -add -dname abc.aus.century.com

To add a name server entry :

# cfgnamesrv –add -ipaddr 192.9.201.1

To display all the DNS entries :

# cfgnamesrv -ls

Network Tuning Parameters:

To display the maximum size of the mbuf pool :

# optimizenet –get thewall

To set a machine as internet work router over TCP/IP networks :

# optimizenet –set ipforwarding=1

To display information on udp_recvspace :

# optimizenet –h udp_recvspace

Network Monitoring:

To display all the statistics, including the device- specific statistics :

# entstat ent0

To reset all the statistics back to their initial values :

# entstat –reset ent0

To display the route to a particular host :

# traceroute nis.nsf.net